Suche

The AMUG – MGA goes USA again

Zum zweiten Mal in 2023 haben wir den Atlantik überquert, um die AM-Welt von Nordamerika zu erleben.

Es gibt nicht viele Veranstaltungen in der AM-Branche, die bereits am Sonntag beginnen und bis Donnerstag dauern und bei denen man gleichzeitig einen halben Tag fliegen muss (wenn man seinen Hauptsitz in Europa hat). Trotz dieser vielleicht ungünstigen Umstände machten wir uns zum ersten Mal nach der Aufhebung der COVID-19-Beschränkungen auf den Weg zur AMUG. Warum Europa verlassen? Wegen des Ziels der AMUG: Anwender und konkrete Anwendungen von AM mit Lösungsansätze zu verbinden. Mit anderen Worten, das gleiche Ziel, das unser Netzwerk verfolgt! Während unser Fokus auf Europa liegt, liegt der der AMUG auf den Vereinigten Staaten. Die Bereitschaft aller Teilnehmer, Veränderungen zu inspirieren und zu leben, macht die größte AM-Konferenz in Amerika so einzigartig.

Und es sind VIELE Teilnehmer: Um zu verhindern, dass die schiere Menge an Menschen einen überwältigt, werden die Teilnehmer gezielt gemischt und beim Mittagessen per Losverfahren neben anderen Teilnehmern platziert. Die Gäste bringen neue Technologien und Materialien auf den Markt, erweitern unser Netzwerk oder stärken die Anwenderperspektive in der Branche. Von morgens bis abends brummt das Hilton-Hotel Chicago wie ein Bienenstock von Gesprächen. Auch die Abendveranstaltungen tragen zum gegenseitigen Kennenlernen bei – manche Abende stehen unter einem bestimmten Thema oder finden, wie in diesem Jahr, im eigens angemieteten Museum für Wissenschaft und Geschichte statt.

Tagsüber kann man sich in zahlreichen Tracks spannende Vorträge zu den neuesten Technologien, Trends und Anwendungen heraussuchen oder etwas über die Sponsoren der AMUG erfahren.

Für unser Netzwerk konnte Stefanie Brickwede gemeinsam mit Ole von Seelen von Trinckle Anwendungen im Bahnbereich und damit verbundene Produktionshilfen vorstellen. Dies stieß auf großes Interesse, zumal der Eisenbahnsektor in den Vereinigten Staaten noch ein relatives Nischendasein führt.

Was sind weitere Trends, die wir im Ausland beobachtet haben?

  • Cybersicherheit, sicherlich auch getrieben durch die vielen Teilnehmer aus der amerikanischen Armee,
  • Neue Metalltechnologien, die auf den Großseriendruck abzielen (MELD), zum Beispiel für das Fahrgestell von Panzern,
  • Metalltechnologien, die auf kostengünstigere Herstellungsverfahren abzielen (Headmade-Materialien),
  • Betondruck ist überall (Präsentationen und ein fantastischer Workshop mit praktischem Ansatz)

Einen sehr guten Gesamtüberblick über aktuelle Trends und Tendenzen gab auch in diesem Jahr Stefan Ritt. Unmittelbar beobachtbar: Indien betritt gerade zunehmend die Weltbühne der additiven Fertigung!

Und der bereits in den sozialen Medien angekündigte gedruckte Basketball von eos und Wilson hatte einen Auftritt: Wer sich fragte, wie das relativ hohe Gewicht eines Basketballs zustande kommt, konnte ihn vor Ort in Augenschein nehmen. Die Lösung: Er wurde mit Doppelwänden bedruckt und springt erstaunlich gut.

Wir werden versuchen, die spannendsten Präsentationen zu unserer Jahrestagung zu bringen.

Nächstes Jahr werden wir wieder dabei sein. Diesen Austausch möchten wir nicht verpassen!

The AMUG – MGA goes USA again

Vorschautext: For the second time in 2023 we crossed the pond and experienced the AM-world of North America

There are not a lot of AM-industry events that start as early as Sunday while lasting until Thursday and that at the same time require flying for half a day (if you are based in Europe). Despite these maybe unfavorable circumstances, we set out for AMUG for the first time after the COVID-19 restrictions were lifted. Why leave Europe? Because of the goal of the AMUG: To connect users and concrete approaches of AM to solutions. In other words, the same goal that our network is pursuing! While our focus is on Europe, AMUG’s is on the United States. The willingness of all participants to inspire and live change is what makes largest AM conference in America so unique.

And there are A LOT of participants: To keep the sheer volume of people from overwhelming you, attendees are purposefully mixed and seated by lottery at lunch alongside other attendees. The guests bring new technologies and materials to the market, expand our network, or strengthen the user perspective in the industry. From AM to PM, the Hilton-Hotel Chicago buzzes with conversations like a beehive. The evening events also contribute to getting to know each other – some evenings have specific themes or, as this year, take place in the specially rented museum for Science and History.

During the day, you can pick out fascinating presentations on the latest technologies, trends, and applications from numerous tracks, or learn something about AMUG’s sponsors.

For our network, Stefanie Brickwede, together with Ole von Seelen from Trinckle, was able to present applications in the railroad sector and associated production aids. This attracted great interest, especially since the railroad sector in the United States is still relatively niche.

What are other trends that we observed abroad?

  • Cybersecurity, certainly also driven by the many participants from the American Army,
  • New metal technologies aimed towards large volume printing (MELD), for example for the chassis of tanks,
  • metal technologies aimed towards more cost-effective manufacturing methods (headmade materials),
  • concrete printing is everywhere (presentations and a fantastic workshop with hands-on approach)

A very good general overview was, again, given this year by Stefan Ritt about current trends and tendencies. Directly Observable: India is just increasingly entering the world stage for additive manufacturing!

And the previously announced on social media printed basketball from eos and Wilson made an appearance: If you wondered how the relatively high weight of a basketball was achieved, you could have a look at it on site. The Solution: it was printed with double walls and bounced amazingly well.

We will try to get the most exciting presentations to our Annual Meeting.

Next year we will be there again. We wouldn’t want to miss this exchange!

share this on Twitter
share this on Linkedin
share this on facebook

16.04.2024

Kick-Off Focus Group Dental

On April 16, 2024 the time has finally come: MGA Medical is kicking off a new Focus Group for the Working Group Use Cases.

X